Wi-Fi Signal Map
Color a floor plan by Wi-Fi signal strength and see what walls, distance and router placement change.
- Router
- Plasterboard
- Brick
- Concrete
- Glass
- Wood
Drag a router to move it, or drag across the plan to draw walls of the chosen material; Erase clears them. Point at the plan to read the power there.
How is Wi-Fi Signal Map working for you?
About Wi-Fi Signal Map
- Model
- Free-space loss plus a loss per wall crossed
- Free-space loss at 1 m, 2.4 GHz
- 40.2 dB
- 15 cm concrete wall
- 11.5 dB at 2.4 GHz, 19.5 dB at 5 GHz
- Materials
- ITU-R P.2040-4, Table 3
Wi-Fi Signal Map colors a floor plan by the power a router's signal arrives with, in dBm. The power falls with the straight distance from the router as in free space, 20 log10(4πdf/c) decibels at distance d and frequency f, the free-space loss that ITU-R Recommendation P.1238 gives and Harald Friis derived in 1946, and it loses more at every wall the straight line crosses: the multi-wall model.
Each wall's loss is that of a uniform slab of its material at the band's frequency, with the reflections inside it, computed from the permittivity and conductivity that ITU-R Recommendation P.2040 lists for concrete, brick, plasterboard, wood and glass. At 2.4 GHz a 15 cm concrete wall takes 11.5 dB and a 10 cm brick wall 3.2 dB; at 5 GHz the concrete wall takes 19.5 dB. P.1238 lists 10 dB per concrete wall at 2.4 GHz in apartments.
Drag a router to move it, draw or erase walls, switch between 2.4 and 5 GHz, and read the power at any point. The chart plots the power along the row through the first router beside the free-space curve, so each wall shows as a step. Export a PNG or the row's values as CSV.
How to use Wi-Fi Signal Map
- Pick a plan. Choose Apartment, House, Office, Two routers or 5 GHz. Each preset sets the plan, the band, the transmit power and the routers.
- Move the routers. Drag a router's ring to move it; Routers sets how many there are, from 1 to 3. The map shows each point's power from the strongest router.
- Draw walls. Pick a material in Wall tool and drag across the plan to draw walls 25 cm wide, or pick Erase to clear them. A preset or Reset puts back the plan's own walls; Undo and Redo step through the settings and router moves.
- Read the power. Point at the plan to read the power there, the distance to the router it comes from and the walls in between. The readout also gives the share of the floor at or above the Signal threshold.
- Compare bands. Switch Band between 2.4 GHz and 5 GHz: free space costs 6.7 dB more at 5.25 GHz than at 2.437 GHz at every distance, and most walls take more.
- Export. Save a PNG of the map, or download the power along the row through the first router as CSV. A share link carries the plan, the walls you drew and the routers.
Frequently asked questions
Why is the signal weak two rooms away?
Because every wall on the straight path takes its share on top of the distance. In this model a 15 cm concrete wall takes 11.5 dB at 2.4 GHz, nearly as much as moving from 1 m to 4 m away (12 dB), from the material values of ITU-R P.2040.
Is 5 GHz worse through walls?
Usually. Free-space loss grows with frequency, by 6.7 dB from 2.437 to 5.25 GHz at any distance, and the wall materials of ITU-R P.2040 absorb more at higher frequency: the 15 cm concrete wall goes from 11.5 to 19.5 dB. P.1238 lists 10 dB per concrete wall at 2.4 GHz and 13 dB at 5.2 GHz in apartments.
Where should a router go?
Where the fewest heavy walls stand between it and the rooms that need the signal, which usually means near the middle of the home and in the open. Move the router and watch the share of the floor above the threshold.
How close is this to a real home?
It is a straight-line model: it leaves out the signal that reflects off walls or bends around doorways, furniture, people and antenna patterns, so real rooms behind walls often read stronger. The transmit power, the wall thicknesses and the threshold are model settings.
References
- International Telecommunication Union (2025). Recommendation ITU-R P.1238-13: Propagation data and prediction methods for the planning of indoor radiocommunication systems. ITU-R.
- International Telecommunication Union (2025). Recommendation ITU-R P.2040-4: Effects of building materials and structures on radiowave propagation above about 100 MHz. ITU-R.
- Friis, H. T. (1946). A note on a simple transmission formula. Proceedings of the IRE 34(5), 254–256.





